Weil-McLain CGa-8 Betriebsanleitung Seite 17

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 56
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 16
17550-110-132/1298
CGi
Water Piping - Low Temp Systems
CONTD
System by-pass —
Applies to
ANY
zoning method
Alternate by-pass piping arrangement
for CONVERTED GRAVITY (OR STEAM) SYSTEMS
Alternate to Figure 7A/7B — for converted gravity (or steam) systems only
(Do not apply to radiant heating systems)
Legend ...............................................................................................................................................
11 Fill valve
12 Diaphragm expansion tank
(see Figure 3B if using closed type expansion
tank. DO NOT use automatic air vent with
closed type expansion tank.)
13 In-line air separator and automatic vent, if used
(Note that the fill valve must always be
connected to the expansion tank, regardless of
location of expansion tank, circulator or air
separator.)
1 Isolation valve
2 Flow/check valve
3 Circulator
4 System temperature gauges
5 Zone valve
6 Drain valve
7 System temperature valves
(see instructions at left for adjusting
valves)
8 Blend temperature gauge
9 Relief valve
10 Automatic air vent
10
Cold
water
fill
11
12
9
8
7a
7b
0302-067c
Alternate
pump
location
To systemFrom system
FIGURE 8
Seitenansicht 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare